Concrete cutting in Santa Ana CA - clean cuts made right where you need them
Slab or wall in the way of a door, a drain line or a new patio? We plan it with you, then cut it clean.
Need an opening cut in a concrete slab or wall?
Concrete cutting in Santa Ana is sawing or drilling through a slab or wall to make an opening, take out a section, or bore a round hole for a pipe, drain or conduit, without breaking up the concrete around it.
Most calls start with something in the way, like a garage slab where a new drain line has to run, a wall that needs a doorway, or a cracked stretch of driveway that has to come out before it's replaced. What moves the price is how thick the concrete is and how much steel is inside it, how long the cut runs, whether it's indoors or out, and whether taking the pieces away is part of the job. The schedule turns mostly on whether the concrete needs scanning first and whether the work needs a permit, so I'll give you your own figure and timing at the estimate, after I've seen the concrete.
How we handle concrete cutting, start to finish
At the estimate I look at what you want opened up and ask whether the slab or wall should be scanned before we cut, because what's running inside it decides where the saw can safely go. Before the saw starts, we mark the cut lines and walk them with you so you've approved exactly where they go. Our crew then makes the cuts, breaks out and hauls the pieces when that's part of the job, and leaves the site swept and tidy. Your quote says plainly whether hauling away the cut pieces and handling the slurry, the gray water and concrete dust a wet saw leaves behind, are included, so the cleanup never turns into a second bill you didn't see coming.
A cut is usually one step in a bigger job. When a damaged section of drive comes out, the new pour that follows is concrete driveway building, and when we open up an old slab beside the house to make room for an outdoor space, the next step is concrete patio construction.
Why Santa Ana homeowners call Mainstay Santa Ana Concrete for concrete cutting
I come out to estimate
I come out to look at the job and write the estimate myself, and our own crew does the cutting, with a lead hand running the site and me checking in along the way. The person who heard what you wanted stays close to the work until it's done.
In business since 2017
We opened in 2017, and I came to the trade from the sales side, writing up concrete jobs before I moved onto a crew to learn it by doing. That's why I'll tell you at the estimate what a cut will and won't do, before you've spent anything.
Licensed in California, insured too
We're fully licensed and insured. California's concrete related services classification covers sawing, breaking and coring, and you can check any contractor's license with the Contractors State License Board before you hire.
Based in Santa Ana, working nearby
We're based in Santa Ana and work across the cities around it in Orange County and nearby, including Orange, Tustin and Garden Grove. Around here we cut a lot of older garage slabs, patios and drives that have to come out before something new goes in.
On a cut, what matters most is knowing what's inside the concrete and what the quote covers before the saw starts. Send us the details or call (657) 643-0084, and I'll come out to take a look.
Tell us where the cut goes and get your estimate
Send the cut's location, its rough length, whether it's a slab or a wall, indoors or out, and a few photos, and we'll reply within one business day. I'll come out to look at the concrete and write your estimate, which is free and comes with no obligation.
Saw cuts, cores and openings
Questions before you book concrete cutting
How much does concrete cutting cost in Santa Ana?
Saw cutting slabs and walls usually runs about $4 to $25 per linear foot across the US, and that's a national market range, not our price. On a small job a minimum charge can matter more than the per-foot rate, and indoor cuts tend to cost more because they need electric, hydraulic or air-powered saws plus water and slurry recovery, ventilation, barriers or dust extraction. I'll give you your own number at the estimate.
Do I need a permit to cut concrete in Santa Ana?
Check with the City of Santa Ana, because its list of work that skips a permit names sidewalks and driveways up to 30 inches above grade, not concrete cutting, and its building official issues permits to alter or demolish structures. The city can issue many permits to the property owner, an authorized agent or a licensed contractor with a current city business license. When your job needs one, we can pull it for you and plan the work around the city's reviews and inspections.
Does the concrete cutter remove the concrete too?
Not always, because sawing and removal are separate jobs and some cutters make the cuts and leave the panels sitting in place. Ask whether removal is in the quote so you can see the full cost of the project, and ours says so plainly either way.
How do I know if my slab should be scanned before cutting?
Scanning matters most where post-tension cables, steel cables pulled tight inside the slab, or electrical conduit, plumbing or other lines may run through the concrete, and structural cuts commonly need a scan before the saw goes through. Whether yours needs one depends on the structure and where the cut goes, which is why I bring it up at the estimate.
What is the best way to cut a concrete slab or wall?
The best way is the saw that fits the concrete's thickness and the room around the cut. A flat saw handles slabs, a wall saw runs on a track along a wall, a hand saw reaches tight spaces and smaller openings, and a wire saw takes on thick or heavily reinforced sections, while round holes for pipe, drain and conduit are core drilled.
Who handles the slurry from concrete cutting in Santa Ana?
Settle it before the cut, because an industry specification makes the owner or whoever hired the work responsible for disposing of slurry safely. A California workplace safety rule calls for walk-behind saws that feed water to the blade the whole time, and the city is required to keep pollution out of the drains it owns or maintains, so where that water ends up is worth deciding up front. Your quote from us tells you whether we're handling it.
Work that often follows a cut
- Concrete driveway building
If the cut is to take out a cracked or sunken stretch of drive, we can pour the new section on a dug-out, packed base instead of loose dirt.
- Concrete patio construction
Cutting back an old walk or slab often clears the way for a new patio, and we plan its slope so rain runs away from your house.